V-Belt Curer Job Description
Work information, duties, and responsibilities of a v-belt curer are the following:
1. Operates automatic presses to cure rubber V-belts: Hoists uncured belts from storage rack arm, using lifting device and slides belts over collapsible curing drum. 2. Aligns belts in individual V-shaped rings of drum, and pushes button to expand first drum segment. 3. Realigns belts in rings and expands last segment. 4. Brushes soap solution on air bag of drum-curing retainer and pushes button to insert loaded drum into retainer. 5. Observes gauges and adjusts pressure and temperature valves and regulator arms to maintain specified curing conditions. 6. Slides carrying device under belts where segments automatically break down when drum slides from retainer after cure. 7. Forces carrying device between belts and stationary segment of drum to break belts loose. 8. Lifts cured belts and slides belts onto rack arm. 9. Changes drums and retainers, using hoist and handtools.
V-Belt Curer Job Salary in Dubai, UAE
The salary for a v-belt curer in Dubai, UAE, may vary depending on the work location and the hiring company. Some employers or companies pay a good salary, while others prefer to offer you a market-standard salary for this job. We suggest not to focus much on the salary but to pay attention to the career growth, working environment, benefits, and cost of living while applying for a job.
Suggestion When Applying For This Job
To better qualify for the job of v-belt curer, it is good that you have at least 1-2 years of minimum experience related to this job before you apply. Also, you must be knowledgeable about the job and ensure that you meet the necessary qualifications needed by the company. If you have those requirements, you can apply online with confidence and submit your CV.
Where To Apply For V-Belt Curer Job in Dubai, UAE
If you're interested in working as a v-belt curer, then we suggest that you look for and apply for this kind of job online. The link below will take you to our partner's job posting for v-belt curer.
V-Belt Curer Related Job Descriptions
V-Belt Builder Job
1. Builds up plies of rubber and filler to form V-belts: Hoists rolls of calendered rubber for belt base and filler from storage to worktable, using hoist. 2. Sets drum to specified circumference by t...
V-Belt Coverer Job
1. Tends machine that covers machine belts with rubberized fabric: Positions belt on pulleys of machine and raises pulleys to hold belt taut. 2. Positions end of rubberized fabric on guide roll and st...
V-Belt Finisher Job
1. Tends machines that notch, measure, and brand identifying information on rubber V-belts: Positions belt onto expandable wheel of notching machine. 2. Starts machine that notches inside surface to m...
V-Belt Skiver Job
1. Tends skiving machine that cuts and shapes edges of uncured rubber belts into V-shape: Turns belt inside out and fits belt over machine holding spindles. 2. Turns screws to adjust angle of cutting...