Tapper Job Description
Work information, duties, and responsibilities of a tapper are the following:
1. Taps refining furnaces or reduction pots by one of following methods to pour molten slag or nonferrous metal, such as copper or aluminum, into molds, crucibles, or ladles: Punches clay plug from taphole, using steel rod, to allow molten metal to flow into molds. 2. Molds clay plugs and inserts them into taphole to stop flow of metal, using rod, or builds clay-retaining wall over taphole. 3. Chips or burns away solidified slag and metal from taphole, using chisel-edged bar, oxygen lance, or by short-circuiting current from bus bar to taphole with steel rod. 4. Signals OVERHEAD CRANE OPERATOR to place pouring crucible near pot. 5. Breaks hole in crust of electrolytic bath, using crowbar. 6. Clamps siphon lid on crucible, and inserts other end of siphon into hole. 7. Attaches airhose to siphon, and turns valve to siphon molten metal into crucible. 8. Lowers anode into bath, using pulley to maintain its position beneath bath surface.
Tapper Job Salary in Dubai, UAE
The salary for a tapper in Dubai, UAE, may vary depending on the work location and the hiring company. Some employers or companies pay a good salary, while others prefer to offer you a market-standard salary for this job. We suggest not to focus much on the salary but to pay attention to the career growth, working environment, benefits, and cost of living while applying for a job.
Suggestion When Applying For This Job
To better qualify for the job of tapper, it is good that you have at least 1-2 years of minimum experience related to this job before you apply. Also, you must be knowledgeable about the job and ensure that you meet the necessary qualifications needed by the company. If you have those requirements, you can apply online with confidence and submit your CV.
Where To Apply For Tapper Job in Dubai, UAE
If you're interested in working as a tapper, then we suggest that you look for and apply for this kind of job online. The link below will take you to our partner's job posting for tapper.
Tapper Related Job Descriptions
Cupola Tapper Job
1. Draws molten metal from cupola into ladles for pouring into molds to make castings: Signals OVERHEAD CRANE OPERATOR or POURER, METAL to place ladle under cupola spout. 2. Withdraws bott from taphol...
Tapper, Shank Job
1. Tends machine that screws bushing into shank of smoking pipe for use in connecting stem to shank: Places previously glued bushing on threaded projection of tapping machine and holds threaded end of...
Tapper, Bit Job
1. Tends press that inserts bushing into end of smoking pipe bits which connects bit to shank: Places rubber bit in hot water to expand hole. 2. Places bit and bushing in opening of press and activate...
Tapper, Hand Job
1. Places empty artillery cartridge cases on table and cuts threads in two previously drilled holes on inside surface for insertion of screw eyes by SCREW-EYE ASSEMBLER, using handtap....
Tapper Ii Job
1. Tends tapping machine that cuts internal threads in watch-setting levers: Places levers in holding fixture of machine and aligns hole in lever under tap. 2. Starts machine that lowers tap into hole...