Casting-and-curing Operator Job

Information about the jobs, its descriptions, work loads, duties and responsibilities.

Casting-and-curing Operator Job

CASTING-AND-CURING OPERATOR JOB will do the fallowing jobs / work – 1. Controls equipment to fill rocket motor cases with rocket fuel and to cure rocket fuel: Attaches handling ring or sling to motor case, using handtools or portable power tools. 2. Positions motor cases in casting rig, using hoist, and tightens holding clamp with wrench. 3. Inserts mandrel inside motor case, using hoist, and tightens clamps on casting rig to hold it in position. 4. Conveys and positions casting can over rig, using hoist, and connects hose to rig. 5. Moves console controls to pump fuel from casting can to motor case. 6. Observes level of fuel in case through closed-circuit television and moves controls to regulate volume of fuel charge. 7. Stops pump and presses hydraulic control to move mandrel into final position in motor case. 8. Lifts motor case onto overhead conveyor, using hoist, and starts conveyor to move motor case into curing oven. 9. Observes recording-instrument charts on control panel of curing oven to verify specified temperatures and curing times.


ADVERTISEMENTS


Where to apply for a job in UAE ?




2019 Related Job Vacancies for Casting-and-curing Operator Job in Dubai UAE

Marble Mason

Company: Abraj construction
Job Details: Signal equipment operators to indicate proper equipment positioning. Direct the casting of the concrete and supervise laborers who use shovels or special tools...
ADVERTISEMENTS


Jobs Data as of 2018-12-02 (Cached)