Tool Programmer, Numerical Control Job Description
Work information, duties, and responsibilities of a tool programmer, numerical control are the following:
1. Operates optical programming equipment to generate numerical control tape program used to control NC machine tools that drill, mill, rout, or notch printed circuit boards: Analyzes drawings, specifications, and phototool to determine program input data, such as hole sizes, tool sizes, reference points, and direction of machine cutting paths, and calculates data, such as starting point coordinates, size of panels or boards, and number of boards per panel. 2. Draws machine tool paths on phototool, using colored markers and following guidelines for tool speed and efficiency, to prepare phototool for use as tool programming aid. 3. Aligns and secures phototool on reference table of optical programmer. 4. Observes enlarger scope of programmer that projects image of circuit board pattern from phototool. 5. Moves reference table, following previously marked paths, to align phototool circuit pattern holes with reference marks on enlarger scope. 6. Depresses pedal or pushes button of programmer to enter coordinates of hole locations into program memory. 7. Repeats process for each hole location on phototool to enter NC machine instructions, such as hole locations, machine paths, and reference points. 8. Keys in additional instructions, such as tool size, machine feed and speed rates, and starting point coordinates, basing entries on specifications, calculations, and knowledge of machine capabilities and programming techniques. 9. Types commands on keyboard to generate NC tape. 10. Observes trial run of NC machine to verify tape program accuracy. 11. Revises NC tape program to eliminate instruction errors. 12. May operate NC machine tools on production basis.
Tool Programmer, Numerical Control Job Salary in Dubai, UAE
The salary for a tool programmer, numerical control in Dubai, UAE, may vary depending on the work location and the hiring company. Some employers or companies pay a good salary, while others prefer to offer you a market-standard salary for this job. We suggest not to focus much on the salary but to pay attention to the career growth, working environment, benefits, and cost of living while applying for a job.
Suggestion When Applying For This Job
To better qualify for the job of tool programmer, numerical control, it is good that you have at least 1-2 years of minimum experience related to this job before you apply. Also, you must be knowledgeable about the job and ensure that you meet the necessary qualifications needed by the company. If you have those requirements, you can apply online with confidence and submit your CV.
Where To Apply For Tool Programmer, Numerical Control Job in Dubai, UAE
If you're interested in working as a tool programmer, numerical control, then we suggest that you look for and apply for this kind of job online. The link below will take you to our partner's job posting for tool programmer, numerical control.