Etched-Circuit Processor Job Description
Work information, duties, and responsibilities of a etched-circuit processor are the following:
1. Performs any combination of following tasks to print and etch conductive patterns on copper-faced plastic, fiberglass, or epoxy board to fabricate printed circuit boards: Cuts board to designated size, using sheet metal shears, following written or verbal instructions. 2. Sands board and either places board in vapor degreaser or immerses board in chemical solution to clean and remove oxides and other contaminants. 3. Sprays or brushes light-sensitive enamel on copper surface and places board in whirler machine to spread enamel evenly, or tends machine that flows light-sensitive resist over board. 4. Laminates light-sensitive dry film to board, using heat and pressure equipment. 5. Exposes board and circuit negative to light in contact printer for specified period of time to transfer image of circuit to board. 6. Immerses exposed board in solution to develop acid-resistant circuit pattern on surface. 7. Compares board to sample to verify development of pattern. 8. Applies acid resist over sections of pattern not developed, using brush. 9. Immerses board in acid or tends etching machine to etch conductive pattern on copper surface. 10. Immerses board in solution to dissolve enamel. 11. Drills holes in board, using drill press, following work sample, drawing, and diagrams. 12. Installs hardware, such as brackets, eyelets, and terminals, using eyelet machine and hand arbors. 13. Reduces circuit artwork prior to printing onto board, using reduction camera. 14. Prints conductive pattern onto board, using silk screen printing device. 15. Fabricates PCB used as prototype of production model.
Etched-Circuit Processor Job Salary in Dubai, UAE
The salary for a etched-circuit processor in Dubai, UAE, may vary depending on the work location and the hiring company. Some employers or companies pay a good salary, while others prefer to offer you a market-standard salary for this job. We suggest not to focus much on the salary but to pay attention to the career growth, working environment, benefits, and cost of living while applying for a job.
Suggestion When Applying For This Job
To better qualify for the job of etched-circuit processor, it is good that you have at least 1-2 years of minimum experience related to this job before you apply. Also, you must be knowledgeable about the job and ensure that you meet the necessary qualifications needed by the company. If you have those requirements, you can apply online with confidence and submit your CV.
Where To Apply For Etched-Circuit Processor Job in Dubai, UAE
If you're interested in working as a etched-circuit processor, then we suggest that you look for and apply for this kind of job online. The link below will take you to our partner's job posting for etched-circuit processor.