Engraver, Machine Job Description
Work information, duties, and responsibilities of a engraver, machine are the following:
1. Sets up and operates engraving machine to transfer designs from mills to copper printing rollers used in color-printing cloth: Lifts printing roller into position on machine with aid of another worker. 2. Places truing I roller in fixture on head of machine and lowers machine head until truing roller rests on surface of printing roller. 3. Starts machine to rotate truing roller against printing roller and turns setscrews until truing roller rotates without horizontal motion to align head of machine with printing roller. 4. Divides register wheel on machine into divisions, according to number of times design is to be repeated around printing roller, and marks divisions on wheel, using chalk. 5. Inserts stud in specified slot on register wheel, replaces truing roller with mill, and moves pitch finger against stop on head of machine to set mill in register for engraving. 6. Lowers mill to surface of printing roller, releases catch on weight lever to apply pressure on mill, and rotates mill one revolution to transfer one repeat of pattern to roller. 7. Repeats procedure until design has been repeated around circumference of printing roller. 8. Examines impression of design on roller to detect repeats of pattern that are out of register. 9. Replaces mill with burnishing roller and works burnishing roller against printing roller to erase defective impressions. 10. Increases pressure on mill if design is in register and starts machine that works mill against printing roller to increase depth of impression. 11. Measures depth of engraving, using depth gauge. 12. Measures width of embossed design on mill, using divider, and converts measurement into number of teeth on side-shift gear, using conversion tables. 13. Releases pressure on mill and turns gear specified number of teeth to move mill into position for engraving design adjacent to first impression and repeats procedure as above until design has been engraved across length of roller. 14. Engages dog in teeth of gear and pitches design in register. 15. Repeats procedure until design has been engraved across length of roller. 16. Mounts engraved roller on mandrel of polishing lathe and operates lathe to remove burrs and smooth roller.
Engraver, Machine Job Salary in Dubai, UAE
The salary for a engraver, machine in Dubai, UAE, may vary depending on the work location and the hiring company. Some employers or companies pay a good salary, while others prefer to offer you a market-standard salary for this job. We suggest not to focus much on the salary but to pay attention to the career growth, working environment, benefits, and cost of living while applying for a job.
Suggestion When Applying For This Job
To better qualify for the job of engraver, machine, it is good that you have at least 1-2 years of minimum experience related to this job before you apply. Also, you must be knowledgeable about the job and ensure that you meet the necessary qualifications needed by the company. If you have those requirements, you can apply online with confidence and submit your CV.
Where To Apply For Engraver, Machine Job in Dubai, UAE
If you're interested in working as a engraver, machine, then we suggest that you look for and apply for this kind of job online. The link below will take you to our partner's job posting for engraver, machine.