Surface-Plate Finisher Job

Surface-Plate Finisher Job Description

Work information, duties, and responsibilities of a surface-plate finisher are the following:

1. Inspects surface of stone plates to determine areas requiring lapping, and levels stone surface to specified tolerance for use as surface plates: Builds bed of timbers on floor beneath head of lapping machine. 2. Positions stone on timbers, using hoist. 3. Aligns stone with arm of lapping machine and levels stone on timbers, using wedges, blocks, and spirit level. 4. Moves straightedge over stone to detect uneven areas on stone surface. 5. Wets stone surface, using hose, and applies abrasive to stone, using brush. 6. Selects lapping block according to uniformity of stone surface or step in finishing process. 7. Lifts block onto stone, using hoist. 8. Secures block to arm of lapping machine, using wrench. 9. Starts machine and presses buttons to guide spinning block over uneven areas of stone surface. 10. Moves tolerance dial indicator through specified patterns on stone and observes dial to detect tolerance deviations. 11. Changes lapping blocks according to readings from tolerance dial indicator and laps surface down to level finish. 12. Laps stone by hand to level surface to specified tolerance. 13. Sights through convex lens of collimator at specified positions on stone surface to determine whether surface plate has been finished within prescribed limitations of accuracy and determine tolerance deviation of plate’s surface. 14. Prepares graph of collimator readings, indicating tolerance deviation at any point on surface of plate. 15. Drills adapter holes in surface plate to facilitate attachment of measuring instruments, using diamond drill.

Surface-Plate Finisher Job Salary in Dubai, UAE

The salary for a surface-plate finisher in Dubai, UAE, may vary depending on the work location and the hiring company. Some employers or companies pay a good salary, while others prefer to offer you a market-standard salary for this job. We suggest not to focus much on the salary but to pay attention to the career growth, working environment, benefits, and cost of living while applying for a job.

Suggestion When Applying For This Job

To better qualify for the job of surface-plate finisher, it is good that you have at least 1-2 years of minimum experience related to this job before you apply. Also, you must be knowledgeable about the job and ensure that you meet the necessary qualifications needed by the company. If you have those requirements, you can apply online with confidence and submit your CV.

Where To Apply For Surface-Plate Finisher Job in Dubai, UAE

If you're interested in working as a surface-plate finisher, then we suggest that you look for and apply for this kind of job online. The link below will take you to our partner's job posting for surface-plate finisher.